Göetze Series 418 Overflow and pressure control valves made of stainless steel, angle-type, with threaded connection - external adjustment -
Highly corrosion-resistant overflow valve - closed, gastight version. This is suitable for all media and due to its large spring range is suitable for a wide range of applications. Therefore it is also ideally suitable, when a customer wants to stock a valve suitable for a wide range of applications and varying set pressures. This valve is particularly maintenance-friendly due to an easily replaced valve cartridge. The valve can also be easily set or adjusted during operation.
.
For the protection of:
.
For the protection of:
- Pressure tanks/-systems for neutral/ non-neutral vapours, gases and liquids
- Steam boilers and steam plants if proportional opening characteristics and only small blow-off volumes are required (i.e. protection in the case of expansion due to heating-up). Please observe plant-specific regulations and use of appropriate valve version and sealing material.
- chemical plants, biogas plants
- Process equipment construction
- Shipbuilding industry and marine equipment
- Mechanical engineering
- Secondary areas in the food-, beverage-,pharmaceutical- and cosmetics- industries
Technical features
|
Type:
Size: Body Material: Seat material: Pres. range: Temp. range: Connections: Operation: Options: |
Angle type weight Overflow/pressure control valves with angle discharge.
3/8" - 1 1/4 - DN 10 - DN 32 Aisi 316 - 1.4404 NBR - EPFM - FKM - PTFE 0,2 - 30 bar - 60°C to + 225°C - depending on seat and seal material BSP - NPT. Female/female or Male/female - Tri clamp without lifting device |