MAX AIR PNEUMATIC ACTUATORS - TYPE RACK & PINON

​Max-Air Technology is the world leader of automation technology and process control products. We design automation technologies that provide competitive advantages. For more than 15 years we have improved our products and added flexible and interchangeable features to offer our customers within the chemical, pharmaceutical, food and beverage, power, oil and gas, wastewater and damper industries advanced automation solutions.

​​Our line of pneumatic control products—including our rack & pinion actuators—provides cost-effective solutions for the most complicated flow requirements, including diverting and multi-port flow applications across a wide range of industries. Our patented adjustable dual-travel stops provide the highest degree of control in the industry at ±10 degrees on each end of the stroke. Our complete product line includes all the control accessories required—such as solenoid valves, limit switches, positioners and a wide range of automation hardware.​​​​

---

GP polypropylene Series

The GP Series line of glass-reinforced polypropylene actuators are designed to withstand the most extreme environments. Available in three sizes. Applications requiring plastic and corrosion resistance are covered with up to 500 in-lbs of torque (Double–Acting).
​

• Shaft bearings separate the pinion gear from the housing and support the shaft for high-cycle applications. 
• The pinion teeth are engaged at the full length and stroke of the piston. The pinion height allows manual override without the need to remove the indicator.
• Pistons incorporate double wear pads (skates) to separate the rack from the actuator wall and serve as both guide and wear bearings.
• Safe preloaded spring cartridges.
• All units are externally marked with a progressive traceable serial number.

---

Technical specifications

Size range:
​Body mat.:
Seat/seal mat.:
Connection:
Pres. range.:
Temp. range:
Operation.:

GP  11 to GP 19 (Torque range: up to 57 Nm)
Glass reinforced polypropylene​ incl.endcaps
NBR & FKM
Acc. to Namur VDI/VDE 3845 and ISO 5211
up to 10 bar
standard up to 85°Press. range: up to 10 bar
90° Double acting - Multiple output shaft ​

---

---