Müller Co-AX valves
REMOTE acting VK10 standard range

MÜLLER CO-AX PRESENTATION
​Over 50 years of müller co-ax. A company having grown from the humblest of beginnings into the epitome of valve technology within the industry.
We are synonymous for innovation and individuality, for confidence and quality, for experience and reliability in valve technology. This is been the case since the beginning of our dynamic development and it will continue to stay that way.
More than 50 years of experience also brings responsibility with it, however: to our company, to what we have achieved with our employees and of course to our customers.

---

Müller CO-AX Valves valve principel - Type VK10 
​Co-ax valves are not just another "valve-in-a-box". Using a wide selection of orifice sizes, port connections, seal and seat configurations, our experienced application engineers tailor valves for maximum performance in your application. Whether you need one valve or one hundred. Simple shut-off valves to flow or pressure control, single valves or multiple valve manifolds, we can save you space, time and money!

• Coaxial valves have a single moving part: the control tube (a).
• When the control tube is actuated by an electromagnet (Figure A) or a pneumatic / hydraulic signal to the actuator (Figure B) the tube moves away from the valve seat (b).
• This allows the media to flow straight through without deviation. Powering the tube back against the seat closes the valve. The tube is held against the seat independent of system pressure. This provides positive shut-off and compensates for seat wear.Dynamic seals (c) prevent shaft leakage.
• Valve are pressure balanced 2/2 way direct acting coaxial valves, NC and NO versions​
• Optimized for gaseous, liquid, gelatinous, highly viscous, pasty, contaminated, aggressive
• ​Certificates PTB (Ex), TÜV, DVGW

(d) coil

(e) actuator ports

---

Technical specification​

Size Range
Body mat wetted:
Seat mat.:
Pressure range.:
Temperature Range:
Connection:
Power supply:
Operation:
​Feed back:
​Options:

DN 10 (1/4")
Brass
NBR, PTFE, FPM, CR, EPDM, special seal materials
0 to 100 bar depending on size.
-20 to +70 (lokal pilot valve)
Threads G 1/4 - G 3/4
24 VDC & 230 VAC via pilot valve 6 bar operating pressure
External or local mounted Solenoid NO /NC, damping, manual 
Inductive
Bracket

---

---