SWEDSPJALL - Series 300 damper is multi louvre damper with multiple blades
Serie 300 are of the type multi louvre damper with several shafts. Serie 300 are a very robust construction equipped with flanged ball bearing on both side. No bearing inside the gas flow.
The Serie 300 dampers are manufactured with ball bearing on both sides. No adjustable stuffing box that can raise the required torque over the actuators limit. Serie 300 can be manufactured in square or round design. The damper can be operating with electric or pneumatic actuator (on/off operation or regulation/control) but also with hand gear. Normally it’s equipped with our standard flanges or flanges according to customer request, but it can also be manufactured with welded ends or wafer type.
The Serie 300 dampers are manufactured with ball bearing on both sides. No adjustable stuffing box that can raise the required torque over the actuators limit. Serie 300 can be manufactured in square or round design. The damper can be operating with electric or pneumatic actuator (on/off operation or regulation/control) but also with hand gear. Normally it’s equipped with our standard flanges or flanges according to customer request, but it can also be manufactured with welded ends or wafer type.
Technical features
|
Type:
Size: Body Material: Sealing material: Temp. range: Pressure range: Operation: Connections: |
Industrial Damper type multi louvre damper heavy duty applications
DN 200 and up. Steel & Stainless steel otherson request Seeling mat. is standard metal to metal. up to 350° C (higher on request) 0,5 bar (G) Manuel - Pneumatic - Electrical - Hydraulik Flanges acc. standard. Others on request acc. to costumer specification. |