SWEDSPJALL - Series 600 swing check damper valve
Serie 600 are a check valve for gas applications with adjustable counterweight to balance the disc. Serie 600 are equipped with flanged ball bearing on both side, but can also built as Serie 150, with one side inner bearing. Standard are whit out adjustable shaft seal, but on request stuffing box are possible on both sides.
Serie 600 are equipped with ball bearings on one or both sides. Construction design either with adjustable stuffing box ore bearing mounted direct to the body, same as Serie 300. With stuffing box no leaking on the shaft will occur to atmosphere. With direct bearings the friction are less that’s give easier balance with the counterweight. The counterweight are balance the weight of the disc to prevent low open pressure and low pressure drop. Serie 600 can be manufactured in square or round design, with one or more shafts. Normally it’s equipped with our standard flanges or flanges according to customer request, but it can also be manufactured with welded ends or wafer type. e.
Serie 600 are equipped with ball bearings on one or both sides. Construction design either with adjustable stuffing box ore bearing mounted direct to the body, same as Serie 300. With stuffing box no leaking on the shaft will occur to atmosphere. With direct bearings the friction are less that’s give easier balance with the counterweight. The counterweight are balance the weight of the disc to prevent low open pressure and low pressure drop. Serie 600 can be manufactured in square or round design, with one or more shafts. Normally it’s equipped with our standard flanges or flanges according to customer request, but it can also be manufactured with welded ends or wafer type. e.
Technical features
|
Type:
Size: Body Material: Sealing material: Temp. range: Pressure range: Operation: Connections: |
Industrial Damper type swing check damper valve
DN 200-3000 mm. Steel & Stainless steel otherson request Seeling mat. is standard metal to metal. up to 500° C (higher on request) 0,5 bar (G) Manuel - Pneumatic - Electrical - Hydraulik Flanges acc. standard. Others on request acc. to costumer specification. |